BMW 5 Series: Surround View
Surround View shows the vehicle surroundings and displays them in TOP View and 3D View on the Central Information Display.
The system comprises the front camera, the two cameras integrated in the exterior mirrors, the rear view camera (RFK) and the Top Rear Side View Camera (TRSVC) control unit. The TRSVC may be referred to as ICAM2 in technical systems.
The images from the four cameras are combined into a panoramic view around the vehicle from different angles using 3D computer graphics.
The driver can choose from preset views or can freely select the view (for example, car wash entrances).
In addition, assistance functions such as guidance lines can be shown on the Central Information Display.
The following camera angles can be displayed:
- Automatic camera angle
- Side view
- Front camera
- Panorama view
- Rear view camera
- Moving camera angle
Automatic camera angle
The system automatically shows the most appropriate camera angle depending on the driving situation, thus providing the driver with optimum assistance when parking and maneuvering. The automatic camera angle shows a steering-dependent view and takes into account the respective direction of travel and the distance information from the Park Distance Control (PDC).
As soon as obstacles are detected, the view changes to a fixed display of the area in front of or behind the vehicle, or changes to the corresponding side view if required.
Side view
This view helps the driver to position the vehicle next to the curb or other obstacles at the side of the vehicle by displaying the side surroundings. The side view is from the rear to the front and automatically focuses on potential obstacles if there is a collision risk.
Both the left and right sides of the vehicle are recorded.
Front camera
The front camera supports the driver when parking and maneuvering. The area in front of the vehicle is recorded by the front camera and shown on the Central Information Display. The front camera view cannot be selected separately. The driver must select the "Auto" camera angle to view it or if desired, switch on the "Panorama View" function.
READ NEXT:
Panorama View
Panorama View enables the driver to see the cross traffic at blind exits and
intersections before
proceeding and provides the driver with optimum assistance in this situation.
Road users that are
hi
Rear view camera
The rear view camera supports the driver when parking and maneuvering. The
area behind the vehicle
is recorded by the rear view camera and shown on the Central Information
Display.
G30 Rear view ca
Overview of exterior camera operating menu
Once the camera systems have been activated successfully, the driver has the
option of selecting the
appropriate view or camera via iDrive.
G30 Switch block with Panorama View button
Parking assis
SEE MORE:
Body overview, Body structure
Body overview
G30 Side frame structure
Multiphase steel (> 300 N/mm²)
Ultra-high-strength steel (> 900 N/mm²)
Aluminum
Deep-drawing steel (< 300 N/mm²)
Other steel grades
Inner roof frame
Roof frame reinforcement
B-pillar reinforcement
Side sill reinforce
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed, by
using the maximum cooling or heating capacity,
and then keeps it constant.
Adjusting
Turn the wheel to set the
desired
temperature.
Do not rapidly switch between different
temperature settings
