Radio/multimedia, see Owner's Manual for
Navigation, Entertainment, and Communication
Automatic climate control
Controller with buttons
Parking brake
Automatic Hold
PDC Park Distance Control
Without Surround View: rearview
camera
Surround View
Cross traffic warning
Parking assistant
Remote Control Parking Surround View: Panorama
View
Driving Dynamics Control
SPORT driving mode COMFORT driving mode
ECO PRO driving mode
ADAPTIVE driving mode
DSC Dynamic Stability Control
Concept
If the vehicle is in idle state, it is switched off. All
power consumers are deactivated.
General information
The vehicle is in idle state prior to opening from
the outside and after exiting a
Concept
When standby state is switched on, most functions
can be used while the vehicle is stationary.
Desired settings can be adjusted.
General information
The vehicle is in the standby state after
Mounting the injectors
Mounting bolts
Plastic sleeve
Holding clamp with bayonet fitting
Rail
Solenoid valve injector
Cast lug
The solenoid valve injectors are fastened to the holding clamp with a bayonet
fitting. There is a plastic
sleeve between the holding clamp and direct rail. This is
On the G30 the 2-wire OABR Ethernet (OPEN Alliance BroadR-Reach) from the G12
is used.
The Ethernet variant with 5 lines (4 data lines and 1 activation line) is still
used on the G30 by the
OBD2 interface to the Body Domain Controller.
Use of 2-wire OABR Ethernet on the G30
The following control