BMW 5 Series: Apple CarPlay preparation
Concept
CarPlay allows certain functions of a compatible
Apple iPhone to be used via Siri voice operation
and iDrive.
Functional requirements
Switching on Bluetooth and
CarPlay
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. "Settings".
5. Select the following settings:
- "Bluetooth"
- "Apple CarPlay"
Pairing the iPhone with CarPlay
Pair the iPhone with the vehicle via Bluetooth.
Select CarPlay as the function:
"Apple CarPlay"
The iPhone is connected to the vehicle and displayed
in the device list.
Operation
For more information, refer to the Integrated
Owner's Manual or the Owner's Manual for Navigation,
Entertainment, Communication.
Frequently Asked Questions
All requirements are met and all required steps
were completed in the specified order. Despite
that, the mobile device does not function as expected.
In this case, the following explanations can help:
The iPhone has already been paired with Apple
CarPlay. When a new connection is established,
CarPlay can no longer be selected.
- Delete the iPhone concerned from the device
list.
- On the iPhone, delete the vehicle concerned
from the list of stored vehicles under Bluetooth
and under WiFi.
- Pair the iPhone as a new device.
If the steps listed have been carried out and the
required function is still not available: contact the
hotline, a dealer's service center or another qualified
service center or repair shop.
READ NEXT:
General information
After one-time pairing, the devices are automatically
recognized and reconnected when
standby state is switched on.
The data stored on the SIM card or in the
mobile phone is
General information
The vehicle supports a large number of mobile
devices, for example mobile phones and MP3
players. Software updates are available for many
of the supported devices. The vehicle is k
General information
You can use the following media formats to call
up the content in the Owner's Manual:
Printed Owner's Manual.
Integrated Owner's Manual in the vehicle.
Printed Owner's Manual
C
SEE MORE:
There are two ways to activate the Parking Maneuvering Assistant function:
Activation via parking assistance button
Activation by "Engaging reverse gear" followed by "iDrive controller
operation"
Activation via parking assistance button
When the PMA is activated via the parking assistance butt
On the G30, the rear light assembly is attached with 3 screws to the body.
Due to the very small gap
dimensions to the body, it is necessary to adjust the rear lights to the body.
Two adjusting elements
(figure B) are provided for this purpose; they can be seen when the trunk is
open and the trim