BMW 5 Series: Managing mobile devices
General information
- After one-time pairing, the devices are automatically recognized and reconnected when standby state is switched on.
- The data stored on the SIM card or in the mobile phone is transferred to the vehicle after recognition.
- For some devices, certain settings are necessary, for instance authorization; see the owner's manual of the device.
Displaying the device list
All devices paired with or connected to the vehicle are displayed in the device list.
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
A symbol indicates, for which function a device is used.
.png)
"Telephone"
.png)
"Additional telephone"
.png)
"Bluetooth audio"
.png)
"Apps"
.png)
"Internet hotspot"
.png)
"Apple CarPlay"
.png)
"Screen Mirroring"
Configuring the device
Functions can be activated or deactivated for paired and connected devices.
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. Select the desired device.
5. Select the desired setting.
If a function is assigned to a device, the function will be deactivated where appropriate for a device that is already connected and the device will be disconnected.
Disconnecting the device
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. Select device.
5. "Disconnect device" The device remains paired and can be connected again.
Connecting the device
A disconnected device can be reconnected.
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. Select device.
5. "Connect device".
The functions that were assigned to the device before disconnecting are assigned to the device when it is reconnected. The functions may be deactivated on a device already connected.
Deleting the device
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. Select device.
5. "Delete device".
The device is disconnected and removed from the device list.
Swapping the telephone and additional phone
If two mobile phones are connected to the vehicle, the functions of the phone and additional phone can be switched.
Via iDrive:
1. "My Vehicle".
2. "iDrive settings".
3. "Mobile devices".
4. "Settings".
5. "Swap telephone/additional tel."
READ NEXT:
Software update
General information
The vehicle supports a large number of mobile
devices, for example mobile phones and MP3
players. Software updates are available for many
of the supported devices. The vehicle is k
Owner's Manual media
General information
You can use the following media formats to call
up the content in the Owner's Manual:
Printed Owner's Manual.
Integrated Owner's Manual in the vehicle.
Printed Owner's Manual
C
SEE MORE:
Using the voice activation
system
Activating the voice activation
system
1. Press the button on the
steering
wheel.
2. Wait for the signal.
3. Say the command.
The symbol on the Control Display
indicates
that the voice activation system is
active.
No other commands may be available. In this
case, operate the function via iDri
System overview
The electronic tire pressure label is an extension to the vehicle software.
No additional components
are required for the integration of this new function. All the information is
supplied by sensors that are
already built into the vehicle.
System overview of the electronic tire pressure label in
