You can trigger the alarm system if you find yourself in a dangerous situation.
To switch off the alarm: press any button.
Headlight courtesy delay feature on
Press and hold the button on the vehicle key for approx. 1 second.
It is possible to adjust the duration of the headlight courtesy delay feature.
Replacing the battery
1. Remove the integrated key from the vehicle key.
2. Place the integrated key underneath the battery compartment cover, arrow 1, and lift the cover with a lever movement of the integrated key, arrow 2.
3. Push battery in the direction of the arrow using a pointed object and lift it out.
4. Insert a type CR 2032 battery with the positive side facing up.
5. Press the cover closed.
6. Push the integrated key into the vehicle key until the integrated key engages.
Have old batteries disposed of by a dealer's service center or another qualified service center or repair shop or take them to a collection point.
Additional vehicle keys
Additional vehicle keys are available from a service center or another qualified service center or repair shop.
Loss of vehicle keys
A lost vehicle key can be blocked and replaced by a dealer's service center or another qualified service center or repair shop.
Malfunction
General information
A Check Control message is displayed.
Vehicle key recognition by the vehicle may malfunction under the following circumstances:
For replacing the battery.
Do not transport the vehicle key together with metal objects.
Do not transport the vehicle key together with electronic devices.
Place the vehicle key in a different location.
In the case of interference, the vehicle can be unlocked and locked from the outside with the integrated key.
Switching the drive-ready state on via emergency detection of the vehicle key
It is not possible to switch on the drive-ready state if the vehicle key has not been detected.
Proceed as follows in this case:
1. Hold the back of the vehicle key against the marked area on the steering column. Pay attention to the display in the instrument cluster.
2. If the vehicle key is detected:
Switch on drive-ready state within 10 seconds.
If the vehicle key is not recognized, slightly change the position of the vehicle key and repeat the procedure.
Frequently Asked Questions
What precautions can be taken to be able to open a vehicle with an accidentally locked in vehicle key?
This requires an active BMW Connected‐ Drive contract and the BMW Connected app must be installed on a smartphone.
An active BMW ConnectedDrive contract is required.