BMW 5 Series Owners & Service Manuals

BMW 5 Series: LATCH child restraint fixing system

General information

LATCH: Lower Anchors and Tether for Children.

Pay attention to the specifications and the operating and safety information from the child restraint system manufacturer when selecting, installing, and using LATCH child restraint fixing systems.

Mounts for the lower LATCH anchors

General information

The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lbs/30 kg when the child is restrained by the internal harnesses.

Safety information

Warning

If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of the LATCH child restraint fixing system can be limited. There is a risk of injuries or danger to life. Make sure that the lower anchors are securely engaged and that the LATCH child restraint fixing system fits securely against the backrest.

Position

shows the mounts for the lower The corresponding symbol shows the mounts for the lower LATCH anchors.

Seats equipped with lower anchors are marked with a pair, (2), of LATCH symbols.

For vehicles equipped with a middle seat: It is not recommended to use the inner lower anchors of standard outer LATCH positions to fasten a child restraint system on the middle seat. Use the vehicle safety belt instead for the middle seat.

Before installing LATCH child restraint fixing systems

Pull the safety belt away from the area of the child restraint system.

Assembly of LATCH child restraint fixing systems

1. Install child restraint system, see manufacturer's information.

2. Ensure that both LATCH anchors are properly connected.

    READ NEXT:

     Child restraint systems with tether strap

    Safety information Warning If the upper retaining strap is incorrectly used for the child restraint system, the protective effect can be reduced. There is a risk of injury. Make sure that the upper r

     Driving

     Start/Stop button

    Concept Pressing the Start/Stop button switches drive-ready state on or off. Steptronic transmission: the drive-ready state is switched on when you depress the brake pedal while pressing the Start/S

    SEE MORE:

     Introduction

    General information The new BMW 5 Series with the development code G30 will be equipped with a further developed and optimized heating and air conditioning system. The heating and air-conditioning system is similar to the BMW G12. The G30 uses the new R1234yf refrigerant. A brushless blower motor

     Concept, General information, Safety information

    Concept Blind spot collision warning detects vehicles in the blind spot or vehicles approaching from behind in the adjacent lane. A warning is issued in various gradations in these situations. General information Two radar sensors in the rear bumper monitor the area behind and next to the vehicle w

    © 2019-2025 Copyright www.bmw5g30.com