BMW 5 Series: Functions
- Functions of the Advanced Crash Safety Module
- Crash-relevant functions
- System monitoring functions
- Active protection
READ NEXT:
Functions of the Advanced Crash Safety Module
The function of the Advanced Crash Safety Module is to permanently evaluate
all sensor signals in
order to identify a crash situation. Based on the sensor signals and their
evaluation, the Advanced
Crash-relevant functions
The Advanced Crash Safety Module must fulfil the following crash-relevant
functions:
Evaluating the sensor signals
Impact detection
Determining actuators to be activated
Specifying the trigger t
System monitoring functions
The Advanced Crash Safety Module has the following system monitoring
functions:
System self-test (pre-drive check)
Display of system operability
Cyclic monitoring
Fault display and fault storage
SEE MORE:
Auto PDC
On the G30, Auto PDC is activated automatically if the vehicle is approaching
an object at a speed
below approximately 3 mph (5 km/h) and the object is located in a
collision-critical area. The Auto PDC
function is available for both the front and rear of the vehicle.
The automatic switch-on
Concept, General information, Safety information
Concept
The system helps to avoid imminent side collisions.
General information
Four radar sensors in the bumpers monitor the
area next to the vehicle in the speed range from
approx. 45 mph/70 km/h to approx.
130 mph/210 km/h.
The front camera determines the lane marking
positions.
If, for instan
© 2019-2026 Copyright www.bmw5g30.com
