BMW 5 Series: Destination guidance
Starting destination guidance
1. 
Press the button on the
Controller.
2. Select the type of destination entry.
3. Select the destination.
4. If necessary, start destination guidance.
Information window for destination guidance
General information
After the route has been started, an information window will be displayed automatically in which the route criteria can be adapted and alternative routes can be displayed. The route magnet can be used to change the current route.
Display the information window again
Press the button on the
Controller.
With operation via touchscreen: when the destination guidance is active, you can tap on the Status field on the map view to display the information window again.
Open active destination guidance
Concept
After a destination guidance has been started, it can be accessed again.
Opening
1. Press the button on the
Controller.
2. 
"Destination options"
Terminating destination guidance
1. 
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Cancel route".
Simulating destination guidance
Concept
While the vehicle is stopped and destination guidance is active, driving on the route can be simulated.
Activating/deactivating
1. 
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Settings".
4. "Demo mode".
Start Demo mode
1. Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Demo"
Functions
"Stop"
"Start"
"Pause"
"Change location"
Setting the speed
1. 
Press the button on the
Controller.
2. Move the Controller to the right.
3. 
"Demo".
4. "Speed".
5. Select the desired setting.
Settings for destination guidance
Further settings can be adjusted for destination guidance. Settings for destination guidance.
READ NEXT:
Route
Concept
During destination guidance, more detailed information
about the current route can be displayed
and the route can be adjusted.
General information
Depending on the equipment, different views o
Route details
Concept
When destination guidance is activated, a list of
route sections can be displayed.
General information
The following information is displayed:
Display of destination guidance information,
s
Spoken instructions
Switching on/off
The setting is stored for the driver profile currently
used.
1. Press the button on the
Controller.
2. Move the Controller to the right.
3. "Voice guidance".
Repeat
1. Press the bu
SEE MORE:
Overview
Button in the vehicle
Intelligent Safety
Radar sensors
The radar sensors are located in the rear
bumper.
Always keep the bumper in the area of the radar
sensors clean and unobstructed.
Switching on/off
Switching on automatically
Blind spot collision warning is automatically activated
after depart
Requirements on the parking space
The following graphic illustrates which conditions or prerequisites the
parking space must meet to be
able to use the Remote Control Parking function.
G30 Prerequisites for Remote Control Parking
Potential parking area
Operating range
Minimum parking space width 8.8 ft (2.7 m)
Maximum
