BMW 5 Series: Messages: for tires without special approval
General information
A low tire inflation pressure may cause the DSC Dynamic Stability Control to be switched on.
Safety information
Warning
A damaged regular tire with low or missing tire inflation pressure impacts handling, such as steering and braking response. Run-flat tires can maintain limited stability. There is a risk of accident. Do not continue driving if the vehicle is equipped with normal tires. Follow the information on run-flat tires and continued driving with these tires.
If a tire inflation pressure check is required
Message
A symbol with a Check Control message appears on the Control Display.
.png)
Inflation was not carried out
according
to specifications, e.g., when the
tire has not been sufficiently inflated
or in the case of a natural steady tire
pressure loss.
Measure
Check the tire pressure and correct as needed.
If the tire inflation pressure is too low
Message
.png)
A yellow warning light is
illuminated in
the instrument cluster.
In addition, a symbol with a Check Control message appears on the Control Display.
.png)
There is a tire inflation
pressure loss.
Measure
1. Reduce the vehicle speed. Do not exceed a speed of 80 mph/130 km/h.
2. At the next opportunity, for instance at a gas station, check the tire inflation pressure in all four tires and correct if necessary.
If there is a significant loss of tire inflation pressure
Message
.png)
A yellow warning light is
illuminated in
the instrument cluster.
In addition, a symbol with the affected tire appears in a Check Control message on the Control Display.
.png)
There is a flat tire or a major
loss in
tire inflation pressure.
Measure
1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with normal tires or run-flat tires.
Run-flat tires are labeled with a circular symbol containing the letters RSC marked on the tire's sidewall.
1. Read the description on What to do in case of a flat tire.
Messages: for tires with special approval
General information
A low tire inflation pressure may cause the DSC Dynamic Stability Control to be switched on.
Safety information
Warning
A damaged regular tire with low or missing tire inflation pressure impacts handling, such as steering and braking response. Run-flat tires can maintain limited stability. There is a risk of accident. Do not continue driving if the vehicle is equipped with normal tires. Follow the information on run-flat tires and continued driving with these tires.
If a tire inflation pressure check is required
Message
A symbol with a Check Control message appears on the Control Display.
.png)
Inflation was not carried out
according
to specifications, e.g., the tire has
not been sufficiently inflated.
The system has detected a wheel change, but no reset was done.
The tire inflation pressure has fallen below the level of the last reset.
No reset was performed for the system.
The system issues a warning based on the tire inflation pressures stored during the last reset.
Measure
1. Check the tire pressure and correct as needed.
2. Perform a system reset.
If the tire inflation pressure is too low
Message
A yellow warning light is
illuminated in
the instrument cluster.
In addition, a symbol with a Check Control message appears on the Control Display.
There is a tire inflation
pressure loss.
No reset was performed for the system.
The system issues a warning based on the tire inflation pressures stored during the last reset.
Measure
1. Reduce the vehicle speed. Do not exceed a speed of 80 mph/130 km/h.
2. At the next opportunity, for instance at a gas station, check the tire inflation pressure in all four tires and correct if necessary.
3. Reset the system.
If there is a significant loss of tire inflation pressure
Message
A yellow warning light is
illuminated in
the instrument cluster.
In addition, a symbol with the affected tire appears in a Check Control message on the Control Display.
There is a flat tire or a major
loss in
tire inflation pressure.
No reset was performed for the system.
The system issues a warning based on the tire inflation pressures stored during the last reset.
Measure
1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with normal tires or run-flat tires.
Run-flat tires are labeled with a circular symbol containing the letters RSC marked on the tire's sidewall.
1. Read the description on What to do in case of a flat tire.
READ NEXT:
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Check the tire inflation pressure in all four
tires, for instance using the tire pressure gage
of a flat tire kit.
For tires with special approval: if the
Malfunction
Message
The yellow warning light flashes
and is
then illuminated continuously. A Check
Control message is displayed. It may not
be possible to identify tire pressure losses.
Measure
A wheel without
Flat Tire Monitor FTM
Concept
The system detects tire inflation pressure loss
on the basis of rotation speed differences between
the individual wheels while driving.
In the event of a tire inflation pressure loss, the
dia
SEE MORE:
Navigation maps
The customer is given a three-year subscription for navigation map updates
for both navigation
systems (Professional Navigation System (OE 609). Furthermore, automatic
updating of the navigation
maps is available for both navigation systems. The prerequisite for this is a
valid BMW ConnectedDrive
Coolant pump
The layout and function of the coolant pump have been revised and adapted to
match the cooling
concept of the Bx8 TU engines.
Coolant pump, Bx8TU engine
Pressure relief valve closed (pressure < 2.1 bar)
Pressure relief valve opened (pressure > 2.1
